首页 HOME    产品 PRODUCT    联系我们 CONTACT   
产品 PRODUCT
Product Categories
No option
[All](2)
Website Search
Keywords
Categories
Current position:HOME > 产品 PRODUCT
产品 PRODUCT


Large Picture
磨头圆盘刷管刷 Engine hone & Brush series ball
Goods Description:Flexible hone,Flexible Ball Style Hone For Surface Finishing & Deburring. Fill Material:Silicon Carbide & Aluminum Oxide,Grit:#60,#120,#180,#240,#320,#600... Product Size: 1.Brush diameters ranging from 5mm to 280mm,Round brush(PW556) diameter is 64mm & 76mm. 2.Brush length ranging from 50mm to 180mm. 3.Stem diameters ranging from 1.8mm to 10mm. 4.Overall length is from 150 to 500mm.
More…

  

The Flexible Hones for Rotors produces the ideal surface finish on disc brake rotors and flywheels.        

1.Lowers Harmonic Vibrations        
Harmonic vibration at the pad-rotor interface is a prime cause of friction induced braking noise. The Flexible Hones for Rotors reduces high pitched "squeal" and "groan" caused by a peaky, rough turned finish.        
2.More Rotors Per Hone        
Lasts much longer than abrasive pads.        
3.Non-Directional Finish        
Spiral grooves on the braking surface are a prime cause of friction induced brake noise.        
4.Ideal for New Rotors too!        
Removes the cut, torn and folded metal fragments from the surface. Decreases Ra Values.        

 

该产品是一种挠性(柔性)去除毛刺抛光毛刷,它是由铁丝作骨架,上面带有许多排列整齐,向外伸展的尼龙丝构成(圆盘刷是以塑料板为底座、尼龙丝为骨架).在每根尼龙丝顶端,带有一个不易破碎的小磨料球.这磨料球可以由碳化硅、氧化铝、碳化硼等各种需要的磨料组成。含磨料尼龙丝相当于同等数量的柔性锉刀,在加工零件时,可任意弯曲,自然贴合到工件内孔轮廓上,能对不平坦的内孔(如阶梯或波浪形状内孔)进行研磨;进入沟槽、裂缝等一般工具难以进入的地方,将毛刺去掉,锐边倒钝为光滑均匀的圆弧,达到去毛刺、刃口钝化和表面精整加工的理想效果。该带磨头管刷是宁波创威工业刷的专业产品,它助您清除精加工后孔表面上的微小毛刺并提高内孔的光洁度,一般提高一小级至一大级。

 

它的典型应用如:工件的表面去毛刺抛光;液压阀孔内槽边去毛刺,交叉孔的去毛刺,空调冰箱(压缩机)去毛刺,缸体去毛刺,发动机零配件、机械加工、孔内加工、刹车毂加工;同时也适用于一些椎圆型、锥型、文氏管型孔的抛光。 它能轻便快捷地对各种形状、尺寸的汽缸、阀门、管腔、管道进行最佳的表面处理;最大优点是:能够自动定心,自动校准的对孔表面进行精细一致的加工,不影响工件原有的精度和尺度.使用方便、安全、经济、效果显著。我们宁波创威工业刷可生产不同尺寸和不同目数研磨料的优质绗磨刷供选择,欢迎您随时联系!

        带砂轮球形磨头去除毛刺抛光毛刷,凹凸面毛刺去除型,挠性磨料圆盘刷,磨孔刷;

        球头绗磨刷,球形研磨刷,球型磨料刷,碳化硅磨球珩磨刷,去除毛刺抛光毛刷;

        磨料球形刷,球头刷,球型刷,磨球刷,管子内孔内壁去除毛刺抛光毛刷;

        弹性镗缸头,柔性镗磨头,软磨石,挠性绗磨(珩磨,研磨)工具刷;

       各种金属管(如铸铁件,不锈钢,合金钢,铝件等)通道内孔交叉孔去除毛刺抛光毛刷;

      (液压件,油缸,汽缸体等)去除毛刺抛光毛刷,气缸研磨(绗磨,珩磨)刷;

       空调和冰箱压缩机去除毛刺抛光毛刷,刹车毂研磨(珩磨,绗磨)刷;

       汽车发动机零配件管道官腔去除毛刺抛光毛刷,研磨(珩磨,绗磨)刷。

Manufacturer,Supplier & Seller of Flexible Ball Style Hone series:

Flexible honing tool,Flexible honing brush,Flexible hone;

Flexible ball-style hones,Flexible ball-style honing tool brushes;

(Engine,Brake) cylinder honing brush,Ball-style cylinder hones;

Flexible cylinder honing tools,Cylinder flex hones;

Flexible ball type hone brush,Brush series ball,Bore honing tools;

A/O,S/C & diamond honing stones,Cross-hole deburring tool;

Standard-duty & heavy-duty silicon carbide flexible hone;

Flexible ball style hone for surface deburring & finishing of cylinder bores,oil and gas pipe,nuclear water pipe,metal (stainless steel,iron,aluminium) tubing, Forcing cone hones.

Flexible honing tools for rotors,Flexible honing brushes for rotors.

The Flexihone Tool is a resilient, flexible honing brush used to improve the internal surface finish of a bore or cylinder.A compliant honing tool for brushing cylindrical surfaces.

 Typical Applications Include:

·         Air Compressors Bores • Compressed Air Tool Bodies • Hydraulic Ram Cylinders • Brake Cylinders (Wheel)

·         Hydraulic Valve Bodies & Valve Guides • Clutch and Brake Master Cylinders

·         Hydraulic Motor Bodies • Finishing of Stainless Steel Tubing

·         Pneumatic Cylinders • Brake Rotors

·         Surface finishing of Boiler Components • Engine Cylinders Bores and Block Liners

Application specially size for Firearms/Revolvers (Pistols ,Handgun Cylinder) / Rifles’ Chamber / Shotgun Barrels/Painball Guns。Standard-duty Silicon Carbide flexible hones use on valve bodies,valve guides,lifter bores,brake cylinders,small engines,tubing and pneumatic cylinders.

Apwell has engineered and manufactured these Flexible Honing Tools to be competitive with similar products in the market. Apwell's products consistently create an ideal edge break, which is smooth and free of deformed metal. The Flexible Honing Tools are ideal in both automatic and off hand applications.    
    
Flexible Honing Tools have round, abrasive beads fastened to the ends of flexible filaments. This self centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool. The Flexible Honing Tool will even provide an "edge break" not possible with conventional honing stones.    
    
Key Features:    
1. Sturdy, self-centering stem.    
2. Flexible filaments are engineered to provide the correct pressure to create an ideal hone - bore after bore.    
3. Rigid abrasive media is firmly attached to the end of the flexible filaments making the tool excellent for tough cross-hole deburring and edge radiusing applications.    
4. Fill Material:Silicon Carbide or Aluminum Oxide,different grit choice,such as 60,120,180,240,320,600,800,1000…    

Product Size:
1. Brush diameters ranging from 5mm to 280mm,Round brush(PW556) diameter is 64mm & 76mm. 
2. Brush length ranging from 50mm to 300mm.
3. Stem diameters ranging from 1.8mm to 10mm.
4. Overall length ranging from 100mm to  500mm.

Great On:
1. Engine bores
2. Pneumatic and hydraulic bores
3. Valve and pump housings
4. Pipes
5. Connecting rods
6. Cam bores
7. Crank bores
8. Valve bores
9. Hydraulic cylinders
10. Stainless steel tubing

Applications:
1. Honing
2. Creating cross hatched surface pattern for oil retention
3. Cylinder port area deburring
4. Eliminating inside flashing

Instructions:
1. Choose the Flexible Honing Tool for your specific hole size. The actual Flexible Honing Tool will be approx 10% larger than the hole size.
2. Use 10-30 weight oil for honing lubrication, when honing hydraulic brake cylinders, use hydraulic brake fluid as a honing lubricant.
3. Have the Flexible Honing Tool rotating upon entry and removal from the bore.
4. Recommended RPM range for the Flexible Honing Tool is 50 to 100 RPM, based on the brush diameter. Air Tools are not recommended.
5. Use 30-40 strokes per minute depending on the RPM. Final stroking may be accelerated to develop a 45 degree cross-hatch angle.
6. Honing time should be approximately 20/45 seconds per bore.
7. Do not use solvents for honing or cleaning.     
8. Clean cylinders after honing with warm or hot water and detergent using an plain nylon brush, and then lightly oil the bore. 

About production
  • Ball hone (Cylinder brush)
  • Ball cylinder hone
  • Flexible hone & Brush series ball
  • Cylinder honing tool brushes
  • Flexible hone for rotors & Rotor hones
  • Flexible ball-style hones
  • Comment
    Comment has been closed

    宁波创威工业刷电话(TEL):86-574-65518086 手机:18968222500  传真(FAX):86-574-65518086  邮箱(E-Mail):apwell@apwell.com 

    地址(ADD):NO.54-11,JINGHAI ROAD,NINGHAI COUNTY,NINGBO,CHINA    ZIPCODE:315600     

    Webmaster